Max. Pressure | 5 metric tons ( 10 MPa on pressure gauge ) limited by supporting structure |
Electric Hydraulic Pump
| • Built in an electric hydraulic pump with Max. load capability of 20 metric tons.- • Built-in digital pressure gauge which automatically cut off electrical pump power at setting
pressure. - • Cylinder size 25 mm in diameter.
- • Bottom cylinder (piston) Maximum traveling distance: 15mm
- • Please click on left picture for details.
|
Vertical Furnace
| • Splittable vertical furnace heated by Ni-Cr-Al resistance wire- º Max. working Temp> 1000oc < 60 minutes
- º Max. Heating Rate: < 10oC/minute
- º If increasing the working temperature to 1200oC, may choose OTF-1500X furnace
- • 30 segment programmable controller with +/-1ºC accuracy
- • RS485 port installed for remote PC operation (Pls click here to order software -
EQ-MTS02-Y at extra cost ) - • Power consumption: 2200W
- • Power input: 208 - 240VAC, 50/60 Hz single phase
- • Note: MTI reserves the right to update the product with better functions without notice
|
Heating Zone
| • Heating Zone Length: 12" (300mm)- • Constant temperature zone: 100mm
|
Quartz Tube & Sealing Flange
|
|
Option Vacuum Pump
| • Max. achievable vacuum level: 10E^-4 Torr by turbo pumping station (EQ-PAC-LD turbo pumping system with powerful backing pump, please don't use small pumps ) - • Or 10^-2 torr by a mechanical pump.
- • Please click on pictures below to choose a vacuum pump at extra cost.
|
High-Temperature Pressing Die Set
| • One set graphite supporting rod (One top & one bottom) is built in. ( bottom left picture )- • One set of 0.5" ID graphite die are included for immediately use. ( bottom central picture)
- • The high temperature dies kit is usually made of high purity graphite with max. working
pressure of 50 MPa - • The graphite pressing die gets broken easily and is consumable, please click on the central
photo below to order extra sets. We can also provide customized die sets upon customer request at extra cost - • Mica spacers are used to adjust the height of die sets (while providing heat insulation).
Please click on the bottom right picture below to order spares.( bottom right photo )
- • The ID( inner diameter ) of the die set must be taken into consideration when using the
hydraulic press to compress the sample. For example, the graphite dies set with an ID of 0.5" can only withstand a maximum pressure around ~0.6 Metric Ton from the press to maintain its structural integrity.
|
Product Instructions & Demo Video
|
|
Dimensions | • 1050mm(L) x 750mm(W) x 1750mm(H) ( please click picture below to see details )
|
Net Weight | 365 kg |
Weight of Shipment & Dimension | 450 kg 48"x40"x83" |
Compliance
| • CE certified - • NRTL or CSA certification is available upon request at the extra cost
|
Warranty
| • The pressing machine was quality inspected in the USA, lifetime support is provided- • One year limited standard warranty, (Consumable part like graphite die do not have any
warranty.) - • (Extended warranty is available up to 5 years at extra cost)
|
Application Notes
| • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.- • This furnace can be modified into a flash-sintering furnace as shown in the picture below:
|