Structure & Features
| • Manual - Auto dual model control. Manual control over the current provides a faster initial heating up but might lose accuracy during the temperature holding. Auto mode is a good compensation for that.
- • KF50 rotatable adaptor with quick clamp enables
easy installation onto vacuum chamber and tube flanges.
- • The magnetic fluid sealed inline swivel prevents
gas/vacuum / electrical lines twisting in the event of KF50 flange rotation. (Optional, please select the features in the optional bar)
- • Tungsten coil heater and alumina crucible for high-
temperature evaporation up to 1300 ºC.
- • Precision temperature control with 30 programmable
segments and +/- 1 ºC accuracy.
- • 1/4'' tube fitting with needle valve is built-in for gas
purging or evacuation.
- • Using this tool, we can modify your tube furnace into
evaprating coater,
|
Input Power | • Input voltage: 208 - 240 VAC 50/60 Hz, single phase, 500W- • Power cable included without the plug
|
Temperature Control & Heaters
| • Working temp: 1350ºC Max(<1hrs)., and 1200ºC for continuous heating. S type thermocouple is included.
- • Tungsten coil heater with the S type thermocouple is
inserted to the bottom of alumina crucible for precise temperature measurement and control.
- • Temperature control console provides up to 30
segments programmable with +/- 1 ºC accuracy. 500W DC evaporation power supply with max. operating current @ 30Amps. The time settings of temperature controller are in seconds. Recommend to limit the temperature heating/cooling rate to < 30 ºC/min. (Optional, if you decide to use your own temperature controller and power supply, please make sure they meet the manufacturer's recommended specs - 500W DC evaporation power supply with max. operating current @ 30Amps)
- • For continuous heating above 800 ºC, alumina fiber
must be used to fill the gap between the refractory liner and crucible. It is important to bury the tungsten coil to prevent heat dissipation
|
Sample Crucible
| • 0.7ml alumina crucible with tungsten heating coil surrounded.- • S type thermocouple inserts for accurate
temperature measurement of the source material.
|
Gas Inlet | • 1/4'' tube fitting is built in for chamber purge or forming gas processing- • One needle valve is built-in to control gas flowing
rate
|
Optional | • Quick disconnect flange with KF50 vacuum port can be easily adapted to magnetic fluid seal, in this case, a tube can be used to create a sealed environment with protective gas or vacuum.
- • The magnetic fluid sealed inline swivel prevents
gas/vacuum / electrical lines twisting in the event of KF50 flange rotation. (Optional, please select the features in the optional bar)
- • The temperature controller is optional, please select
this feature in the optional bar. 2'' Tube Flange
60mm O.D; 80mm O.D; 100mm O.D Tube Flange |
Overall dimension
|
( The length of insert rod can be customized upon request )
|
Compliance | • CE Certificate- • NRTL or CSA cerification is available upon request
at the extra cost.
|
Warranty | - One-year limited warranty with lifetime support
|
Net Weight | |
Operation Instructions | |