| Power | |
| Traverse Speed | 28 - 90mm/sec adjustable |
| Stroke Length | 29 - 930mm |
Platform
| - Aluminum alloy flat vacuum chuck
- Vacuum chuck Dimensions: 1100mm (L) x 350mm (W) x 25mm (H)
|
Vacuum Pump (Optional)
(The oilless pump was removed from the standard pack since 02/26/2016) |  |
Film Applicator
| - Built-in pushing bar for using micrometer adjustable applicator
- 300 mm width Applicator with micrometer adjustable head included making coating up to 1000mm(L) x 300mm(W)
|
| Max. Coating Area | 1100mm (L) x 350mm (W) |
| The accuracy of Film thickness | +/- 0.01mm |
Application Notes
| - Pic.1 and 2 show coated cathode and anode for Li-Ion battery. Please click here to see how to coat an electrode sheet.
- It is recommended to operate the coater under a fume hood. (Click Pic.3 for detail.)
- May need a vacuum mixer to remove air bubbles inside slurry to make uniform coatings (Click Pic.4 )
- You may need a Slurry Viscosity Tester to make coatings consistent (Click Pic.5 for detail.)
- You may need a vacuum oven to dry the films and remove binder after coating. (Click Pic.6 for detail.)
 Pic.1  Pic.2  Pic.3 Pic.4  Pic.5  Pic.4 |
Heating Vacuum Bed
| - Bottom Heated vacuum chuck
- Max. working power: 3000W
- Max. heating temperature: 120°C
- Precision temperature controller with +/- 1ºC accuracy.
- Tip: For drying the coated Li-ion battery electrode sheets (usually 80°C is required), simply set the target temperature in the temp. controller, close the lid and wait for the slurry to be dried.
|
Machine Dimensions
| - 1245mm (L) x 500mm (W) x 670mm (H) (Max Height)
  |
| Net weight | 60 kg |
| Shipping Dimensions | 58" x 40" x 35" |
| Shipping Weight | 400 lbs |
Compliance | - CE certified
- NRTL or CSA certification is available upon request at the extra cost. (base on UL61010/SPE-1000 regulation).
|
| Warranty | One-year limited with lifetime support |
Operation Video
&
Instructions |
   
|
Pic.3
Pic.5 
