OTF-1200X-S-FB is a Fluidized Bed Verticel Furnace with 1'' O.D Quartz Tube (2'' O.D enlarged central area) for powder CVD applications.
It consists a vertical-positioned cylindrical heating chamber which surrounds the quartz tube with a built-in filter right in the lower middle section of the central heating zone.
Its filter is a porous (15 ~ 40 microns) quartz frit that allows the controlled gas flow pass through and float the particles on a cushion of the gas stream where the interaction between the solid and gaseous materials take place.
SPECIFICATIONS
Fluidized Zone
•Provides uniform distribution of the gas blast over the entire cross section of the tube chamber •Solid particles are suspended by an upward gas flowing •Excellent heat transfer and coating to every single suspended particles •Processed materials can be discharged from the top side of the tube after the cap is been taken off
•Note :
The gas is passed upward through the fluidized bed at a high enough velocity to lift the particles.
However, particles may be swept away from the tube chamber entirely if the velocity was set too high.
Depends on the particle size, you may want to adjust the gas-in pressure and flow rate until particles are lifted and move turbulently inside of the tube.
Quartz Frit
•Frits with forced convection design can trap the particles within the central heating area
○ Frit : 15 ~ 40 microns porous, 22 mm O.D x 4 mm thick
Furnace Casing
•Double layer steel structure with air cooling •Split door design for easy instalation of tube •High purity Al2O3 fiberous insulation designed for maximum energy saving
Power
1200 W
Voltage
AC 110V or 220V Single Phase, 50/60 Hz
Max. Temperature
1100 oC
Continuous Temperature
1000 oC
Max. Heating Rate
<= 20 oC /min
Tube Size and Materials
•One quartz tube is included. Main tube with bottom frit and enlarged space for particles processing •Two Ends : 25 mm O.D, 22 mm I.D; Central : 50 mm O.D, 44 mm I.D, for detailed size, please refer to the picture in below. •Central enlarged area ensure the high aerodynamic performance
Sealing Flanges
•Bottom flange : Regular designed 1'' bottom flange with 1/4'' tube fiting for introducing primary gas •Top Flange : Special designed 1'' top flange with backstreaming secondary (precursor) gas inlet and exhaust, please click the picture in below for detail
Heating Zone Length
200 mm (single zone)
Constant Heating Zone
100 mm (+/- 2 oC)
Temperature Controller
•30 programmable segments for precise control of heating rate, cooling rate and dwell time. •Built in PID Auto-Tune function with overheating & broken thermocouple protection. •Over temperature protection and alarm allows for operation without attendant(s). •+/- 1 ºC temperature accuracy.
Heating Elements
Fe-Cr-Al Alloy doped by Mo
Fitting Ports
1/4'' Tube Fittings were installed on both sides of the flange for standard connection to the gas supplier
Dimensions
340 mm × 300 mm × 1000 mm ( W x L x H )
Net Weight
~20 Kg (excluding mobile cart)
Shipping Weight
200 lbs
Warranty
One year limited warranty (Consumable parts such as heating elements, processing tubes and o-rings are not covered by the warranty, please order the replacement at related products below.)
Compliance
•CE Certified •UL / MET / CSA Certification is available upon request, additional charges will apply
Warning
Tube furnaces with quartz tube is designed for using under low positive pressure < 0.14 MPa (absolute pressure)