MSK-AFA-L800 is a CE Certified 800 mm long tape casting coater with vacuum chuck, oilless vacuum pump, and micrometer adjustable applicator. It is designed for producing long thick film and has a unique driving system to produce smooth coating at all types of materials up to 800 mm (L) x 250 mm (W). It is specially designed for electro coating of varies cylindrical batteries such as 18650. New! MSK-AFA-L800-H with heating lid is available in option bar now!
SPECIFICATIONS
Voltage
110 V AC or 208 - 240 V AC 50/60 Hz Single Phase
Power
150 W
Traverse Speed
0 - 80 mm/sec variable
Stroke Length
10 - 800 mm adjustable by using Adjustable Position Switch
Platform
•Aluminum alloy flat vacuum chuck •Vacuum chuck Dimensions : 800 mm (L) x 250 mm (W) x 25 mm (H)
Vacuum Pump
120 L/m oilless vacuum pump included for immediate use (Click the picture below to see details)
Film Applicator
•Built in pushing bar for using micrometer adjustable applicator, which may be ordered separately •250 mm width Applicator with micrometer adjustable head included to make coating upto 800 mm (L) x 250 mm (W) (Click picture below to see details) (Click here to order other size film applicators)
Max. Coating Area
800 mm (L) x 250 mm (W)
Accuracy of Film thickness
+/- 0.01 mm
Application Notes
•Rolling is absolutely necessary to ensure good density and adhesion of electrode materials to the current collector substrate after coating. Please select a rolling press from here. •The film must cover the entire vacuum chuck to ensure stability during coating •You may need a vacuum oven to dry the films after coating •Please click the first two pictures below for coated cathode and anode of Li-Ion battery •You may need a vaccum mixer to remove air bubbles inside the slurry and to make all coatings uniform (click the third picture below for details) •You may need a Slurry Viscosity Tester to make coatings consistent (click the forth picture below for details)
Heating Lid ( optional ) MSK-AFA-L800
•Heating lid is available at extra cost for drying. please select mode MSK-AFA-L800 from product option table. •Working voltage : 110 V •Max. working pwoer : 1000 W •Note : The drying temperature is adjustable by fine-tuning the infinite control which is a device regulates the heating power. It is located on the front of the heating lid and allows easy&instant power adjustment. Typical usage of the heating lid is to dry the wet slurry immediately after the coating is finished. It provides convenience to the transfer of electrode sheets with fully cured coating slurry. •Tip : For applications (such as coated Li-ion battery electrode sheets) require drying temperature ~ 110C, simply adjust the infinite control to level 4.5, close the lid and wait for the coated slurry to be dried.