•36V 10.8Ah ( 388.8Wh, 30A rate ) with PCM for E-Bike
Voltage
Voltage:
•36V ~ 37 V (working) •42 V (peak) •20V (cut-off)
Capacity
10.8 Ah (388.8 Wh)
Cycle life
80% of initial capacity at 750 cycles @ 1.0C discharge rate
Protection
One PCM (30A limit) with balance function is installed in the battery pack to balance charging and protect battery module from
•Over discharge beyond 42.0V •Over discharge below 25V •Over drained beyond 30A (continuous). Short burst upto 80A •Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
Prewired
•Charge terminal: 6" long 18 AWG open end wire •Discharge terminal: 6" long 12 AWG open end wire
Charging rate
10A Max
Max. Discharging Rate
•30 Amp ( continuous ) •40 Amp ( < 30 seconds )
Dimensions (LxWxH)
270 mm(10.6") x 84 mm(3.3") x 82 mm (3.2") .
Weight
2960 grams (6.0 lbs 8.4Oz)
Smart Tips
•Please choose 37V Li-Ion smart charger below. •For fast charging(3.0 hrs), You may use5.0A Smart Li-ion battery charger + the connector adaptor . The estimate charging time is about 5.4 hrs. •You can choose our3.0A 37V Smart Li-Ion Battery charger to recharge this pack. The estimate charging time is about 5.4 hrs. •Smart Charger (1.9A, CE listed, UL approved) for 37V Li-ion/Polymer Rechargeable Battery Pack. The estimate charge time is about 8.5 hrs •Warning: Please wait 30 minutes after charged to allow PCM to balance the cells to achieve the best performance
Applications
Replace 36 V NiMH and Lead acid battery with much longer cycle life
Warning
•36V LiNiMnCo battery pack shall be cut-off at =< 42.0V ( <=4.2V/cell ) during charging and >=20.0V ( >=2.0V/cell) during discharging •We are not responsible for any damages or losses caused by misuse (included but not limited to: improper charging/discharging, any changes of this battery pack, miss-assembling battery packs) •Always pay attention when charging the battery pack. Battery shall put in a place or container with fire - proof to avoid any accident •Please always check battery polarity before connection to device. Never make wrong polarity connection
