•High Power Polymer Li-Ion Box Battery: 37V 10Ah (370 Wh) in Plastic Enclosure 30A Drain Rate with fuel gauge •The state art of PCM is installed the pack to protect battery from over-charged, over-discharged and over-drained •Battery pack is installed in Plastic Enclosure Enclosure: 200 x120x75 (mm) (10-22) •Fuel Gauge for PCB of 37.0v Li-Ion Battery Pack (10 cells pack) is installed on surface of battery pack
•Touch the switch on the display , you can monitor the energy level of battery pack
Voltage
37 v (working) 42 V ( peak)
Capacity
10 Ah (370 wh)
Cycle life
>300
Prewired
•One PCM(30A limit) with balance function is installed in the battery pack to balance charging and protect battery module from ◦Over discharge beyond 42V
•Over discharge below 25V •Over drained beyond 30A •Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
•Charge/Discharge terminal: Copper Barrel Lug terminal attached via Binding Post
•Barrel Lug terminal size (LxWxH): 0.6" (14mm) x 0.3" (8.0mm) x 0.04" (1.0mm) •Binding Post size (DxL): 0.8" (19mm) x 1.2" (30 mm)
•Red Binding Post = Positive •Black Binding Post = Negative
•Must use proper AWG wire gauge to match the max discharge current (40 A), Please click here for American Wire Gauge table and AWG Electrical Current Load Limits table. You may consider to DIY with our wire below.
•10 AWG Red wire and 10 AWG Black wire. •12 AWG Red wire and 12 AWG Black wire.
Max. Discharging Rate
30 Amp Limited by PCM
Dimensions (LxWxH)
232mm (9.2") x 120mm (4.8") x 75mm (3.0")
•L include the Binding Post's length
Weight
5.8 Lb (2630 grams)
Smart Tips
•Please use either 37V Li-Ion smart charger below.
•For fast charging (3.0 hrs) , You may use 5.0A Smart Li-ion battery charger + Connector Adaptor: From 4 Pin male Cannon plug to Clips •You can choose our 3.0A 37V Smart Li-Ion Battery charger to recharge this pack. The estimate charging time is about 5.0hrs. •Smart Charger (1.9A, CE listed, UL approved) for 37V Li-ion/Polymer Rechargeable Battery Pack.The estimate charge time is about 7.9hrs •Warning: Please wait 30 minutes after charged to allow PCM to balance the cells to achieve the best performance
•If you connect two of these modules in parallel, you may build a 37 V 20 Ah Battery pack with a 60 Amp discharge rate with suitable wiring •Optional for Fire Retardant Bag: 295mmx230mmx75mm. •Optional Quality Multi Departments Bag 5.5x4.5x7.5"
Applications
•Replace 36V NiMH battery pack with much lighter weight for e-bike , •Pefect fit for Sakura Mustang Electric Chopper . •For RC robot and RC aircraft which need high current drain •Please click here to see the Comparison Poly-Li pack vs NiMH / SLA to know the advantages
Warning
•Please note this battery is for R&D use only and NOT for individual customers. We are not responsible for any damages or losses caused by misusing •Please never discharge the battery pack beyond its Max. rating