The 24V DC Voltage Displayer is use for showing the battery voltage level.It can be installed on the front handle bar, and consists of 6 LEDs.You can use to view how much power left in the battery pack.You shall charge battery pack when battery is almost empty.This will prevent the battery from getting over discharged and shorten the life of the battery.It is design to mount on handle bar. It is perfect for 24V E-bike and other 24V battery pack application
Length
2.6" (66 mm)
Width
1.6" (41 mm)
Height
2.3" (58 mm)
Weight
1.5Oz (41 grams)
Clamp internal dia
0.82" (20mm), the monitor can be mounted to diameter 0.8" (20mm) to 1.0" (26mm) bike handle bar (tightening screw and nut is NOT included)
One JST connector is included for connecting between display and the device that you want to monitor Please click here to view large image. Need the connector adaptor for male Tamiya pack?
Bar mount is built on the back of the display. Simple to install on bike handle bar -just snap on. For tighter fit - use screw and nut to tighten it (not include with package). Please click here to view large image.
Display Status
•All 5 LEDs are on (except the one at the far left) the battery voltage is over 24V or fully charged •The far right LED is off, the battery voltage is below 24V •The far left LED is on and all other LEDs off, the battery voltage is dropped below 20V
Batteryspace is not responsible for any damage caused by misunderstanding and misuse
